During the summer of 2020 I installed new in-wall speakers as part of my home theatre makeover. I love the dynamic sound they provide, and the space they saved gave me extra room for seating. GoldenEar\'s Invisa Signature Point Source (SPS) in-wall speaker can do the same for your custom-installed audio system.

GoldenEar Invisa Signature Point Source (SPS) in-wall speaker

Use this stealthy speaker in the front of your room as a left-, centre-, or right-channel speaker. Or install a pair or two as your system\'s surround channels and get immersive special effects without taking up shelf or floor space.

High-tech design for high-performance sound

The SPS is the best custom-integrated speaker in GoldenEar\'s esteemed Invisa Series. That\'s due in part to a unique design that pairs a High-Gauss Reference HVFR (High-Velocity Folded Ribbon) tweeter with four 5-1/4 cast-basket woofers for ultra-smooth, ultra-revealing sound.

The outermost woofers handle only lower frequencies (below 500 Hz), while the inner woofers reproduce higher mids (up to 3,000 Hz) and blend with the tweeter. GoldenEar\'s proprietary MVPP (Multi-Vaned Phase Plug) technology on the inner woofers helps deliver precise, responsive sound in both vertical and horizontal installations.

A unique tweeter yields superb highs

The SPS\'s advanced Reference HVFR tweeter is actually a trickle-down technology borrowed from GoldenEar\'s top-of-the-line Triton Series. It uses neodymium magnets to squeeze and pressurize the air and move a high-density Kapton film diaphragm.

This no-resonance, low-distortion design helps the tweeter reach a remarkable 35,000 Hz while keeping a smooth, detailed response even at high volume. There\'s almost no moving mass, so it isn\'t subject to the piston-like issues of traditional dome-style tweeters (namely, \"wobble\" or distortion). The resulting sound is terrific, with a wide soundstage and pinpoint stereo imaging.

DIY installation

If this is a do-it-yourself install, check out our guide to installing in-wall speakers, along with our selection of in-wall speaker wire. Paint the included magnetic grille to have your speaker blend in with your dcor.

Product highlights:

• ideal for use in a stealthy home theater system, or as part of an in-wall stereo music system
• installs horizontally as a center channel, or vertically as a left- or right-channel speaker
• High-Gauss Reference HVFR (High-Velocity Folded Ribbon) tweeter for natural and revealing highs
• four 5-1/4\" high-definition, cast-basket polypropylene woofers for tight bass and articulate midrange
• the outermost drivers handle only lower frequencies (below 500 Hz)
• inner woofers handle frequencies up to 3,000 Hz to blend with tweeter
• frequency response: 25-35,000 Hz
• recommended amplifier power: 20-350 watts
• sensitivity: 92 dB
• nominal impedance: 8 ohms
• unobtrusive frame and low-profile, paintable magnetic grille for discreet installation
• optional back-box ensures well-balanced sound and protects against dust and dirt
• optional pre-construction brackets help provide a precise, secure installation