Cart

No products in the cart.

    Audio Technica BP4071L

    Audio Technica BP4071L

    • $147.00
    • $1,469.00
    Availability: In Stock
    Category:

    Line + Gradient Condenser Microphone

    At 21.22 long, Audio-Technicas new BP4071L is among the longest shotgun microphones on the market today. Originally developed at the request of broadcast professionals, this microphone boasts an extremely narrow polar pattern, excellent rejection from the sides and rear of the microphone, along with crisp, intelligible audio reproduction. It offers switchable low-frequency roll-off and a 10 dB pad, and comes generously equipped with a stand clamp, windscreen, and case.

    • Overall length of 21.22 with an extremely narrow, highly directional pickup pattern
    • Ideal for use in broadcasting, film/TV production, and theater sound reinforcement
    • Direct-coupled, balanced output ensures a clean signal even in high-output conditions
    • Transformerless design for improved pickup of transients
    • Rugged housing made of lightweight structural-grade aluminum alloy
    • Interference tube design for narrow acceptance angle
    • Switchable 80 Hz high-pass filter & 10 dB pad
    • RoHS-compliant free from all substances specified in the EU directive on the reduction of hazardous substances (RoHS)
    ELEMENT Externally polarized (DC bias) capacitor
    POLAR PATTERN Line + gradient
    FREQUENCY RESPONSE 20-18,000 Hz
    LOW FREQUENCY ROLL-OFF 80 Hz, 12 dB/octave
    OPEN CIRCUIT SENSITIVITY -29 dB (35.5 mV) re 1V at 1 Pa
    IMPEDANCE 50 ohms
    MAXIMUM INPUT SOUND LEVEL 141 dB SPL, 1 kHz at 1% T.H.D.;
    151 dB SPL, with 10 dB pad (nominal)
    NOISE 13 dB SPL
    DYNAMIC RANGE (typical) 128 dB, 1 kHz at Max SPL
    SIGNAL-TO-NOISE RATIO 81 dB, 1 kHz at 1 Pa
    PHANTOM POWER REQUIREMENTS 48V DC, 4.8 mA typical
    SWITCHES Flat, roll-off; 10 dB pad (nominal)
    WEIGHT 175 g (6.2 oz)
    DIMENSIONS 539.0 mm (21.22\") long,
    21.0 mm (0.83\") maximum body diameter
    OUTPUT CONNECTOR Integral 3-pin XLRM-type
    ACCESSORIES FURNISHED AT8405a stand clamp for 5/8\"-27 threaded stands; 5/8\"-27 to 3/8\"-16 threaded adapter; AT8147 windscreen; two O-Rings; protective carrying case
    AUDIO-TECHNICA CASE STYLE SG5

    Add a Review

    Your rating: